EDGE EDBX12D2-E3: DBX Series 12" 1000W RMS Dual 2 Ohm Subwoofer

Details

The EDGE EDBX12D2-E3 is a 12 inch subwoofer from the DBX Series, rated at 1000 watts RMS and 2000 watts peak with a dual 2 ohm impedance. Its motor pairs a 100 oz double-stacked Y35 ferrite magnet with a 2.5 inch voice coil on a black aluminium former, mounted in a pressed steel torsion basket. The non-pressed paper cone uses a stitched wide-roll foam surround and EDGE's two-piece dust cap, which the maker says stiffens the cone. EDGE quotes a 25Hz to 850Hz frequency response, a 6.7 inch (170mm) mounting depth and an enclosure volume of 1.5 to 2.5 cubic feet. Specifications • Series: DBX Series • Type: Subwoofer • Size: 12" • RMS Power: 1000 W • Peak Power: 2000 W • Impedance: Dual 2 Ohm • Voice Coil: 2.5" black aluminium former • Frequency Response: 25Hz - 850Hz • SPL: 84 dB • Magnet: 100 oz dual stacked Y35 ferrite • Cone: Non pressed paper • Surround: Big roll foam, stitched • Mounting Depth: 6.7" (170mm) • Enclosure Volume: 1.5 - 2.5 ft3 • Basket: Pressed steel torsion basket • Dust Cap: Custom tooled IMPP, two piece • Spider: 1 layer black PC • Top Plate: 10mm black anodised • T-Yoke: 10mm black anodised, flat • Gasket: Rubber • Terminals: Spring loaded connectors • Fs: 34Hz • Qts: 0.625 • Qes: 0.715 • Qms: 4.96 • Vas: 24.7L • Mms: 272.2g • Cms: 78.4 μM/N • BL: 17.2 T • Le: 2.2 mH • Sd: 471 cm2 • Re: 2 x 1.8 Ohm • Sold As: Single